Resin Filter | 10x
Capture and remove impurities in your 3D printing resin with our Resin Filter. Designed with a 125μm mesh in a paper funnel, it's ideal for filtering out cured particles. A must-have, especially after failed prints. Compatible with standard resins; not ideal for high-viscosity types. Prioritize print purity.
Product information "Resin Filter | 10x"
Resin filter are paper funnel with integrated 125μm mesh to filter cured particles from resin.
Always wear Nitrile Gloves when handling Resin.
How to use Resin Filter
- If available, place Resin bottle on a silicone mat and use a PP funnel to stable the filter.
- Pour the resin slowly from the resin tank of the 3D printer through the filter into the bottle.
Resin should be filtered as a general maintenance, especially after a failed print to remove loose particles.
Advantages of Resin Filter
- Remove any particles that could negatively affect future prints.
- General good practice for maintenance.
Compatibility
Compatible
- Most Standard Resins
Not Compatible
- High Viscosity Resin
Disposal of Resin Filter
Cure remaining liquid resin under UV Light source. Afterwards Resin Filter can be disposed in the general waste stream.
Login