Resin Filter | 10x
Capture and remove impurities in your 3D printing resin with our Resin Filter. Designed with a 125μm mesh in a paper funnel, it's ideal for filtering out cured particles. A must-have, especially after failed prints. Compatible with standard resins; not ideal for high-viscosity types. Prioritize print purity.
Resin filter are paper funnel with integrated 125μm mesh to filter cured particles from resin.
Always wear Nitrile Gloves when handling Resin.
How to use Resin Filter
- If available, place Resin bottle on a silicone mat and use a PP funnel to stable the filter.
- Pour the resin slowly from the resin tank of the 3D printer through the filter into the bottle.
Resin should be filtered as a general maintenance, especially after a failed print to remove loose particles.
Advantages of Resin Filter
- Remove any particles that could negatively affect future prints.
- General good practice for maintenance.
Compatibility
Compatible
- Most Standard Resins
Not Compatible
- High Viscosity Resin
Disposal of Resin Filter
Cure remaining liquid resin under UV Light source. Afterwards Resin Filter can be disposed in the general waste stream.
Supplemental information
Login